Doc typo fixes

Signed-off-by: Laurent Bercot <ska@appnovation.com>

6 files changed, 10 insertions, 10 deletions

diff --git a/doc/quickstart.html b/doc/quickstart.html
index 1f8cd9e..4ec6a48 100644
--- a/doc/quickstart.html
+++ b/doc/quickstart.html
@@ -44,17 +44,17 @@ add the <tt>-d /dev</tt> option to the <tt>s6-linux-init-maker</tt> command line
  <li> Reboot. Warning: use your <em>old</em> reboot command, that you saved, not the new one
 that has just been created by <tt>s6-linux-init-maker</tt>, because you're still running on
 your old init system and need to use a reboot command that matches it. </li>
- <li> After the reboot: congratulations! your machine is now running a s6-based init system. </li>
+ <li> After the reboot: congratulations! your machine is now running an s6-based init system. </li>
  <li> To shut the machine down, use <tt>/sbin/shutdown</tt>, <tt>/sbin/halt</tt>,
 <tt>/sbin/poweroff</tt> or <tt>/sbin/reboot</tt> as usual. </li>
 </ol>
 
 <h2> FAQ </h2>
 
-<h3> How do I convert a runit setup to a s6 one ? </h3>
+<h3> How do I convert a runit setup to an s6 one ? </h3>
 
 <p>
- A runit and a s6 setup are very similar. There are just three things you
+ A runit and an s6 setup are very similar. There are just three things you
 need to pay attention to:
 </p>
 
@@ -105,7 +105,7 @@ filesystems will be unmounted and the machine will be rebooted and/or stopped.
 </p>
 
 <p>
- So, the quickest way to port a runit setup to a s6-linux-init one is to:
+ So, the quickest way to port a runit setup to an s6-linux-init one is to:
 </p>
 
 <ul>
diff --git a/doc/s6-linux-init-hpr.html b/doc/s6-linux-init-hpr.html
index 4bf38cd..f0ed6fe 100644
--- a/doc/s6-linux-init-hpr.html
+++ b/doc/s6-linux-init-hpr.html
@@ -20,7 +20,7 @@
 
 <p>
  <tt>s6-linux-init-hpr</tt> triggers the software shutdown procedure,
-or, with the <tt>-f</tt> option, it perform an immediate hardware shutdown.
+or, with the <tt>-f</tt> option, it performs an immediate hardware shutdown.
 It is normally invoked through <tt>halt</tt>, <tt>poweroff</tt> or
 <tt>reboot</tt> wrappers created by
 <a href="s6-linux-init-maker.html">s6-linux-init-maker</a>.
diff --git a/doc/s6-linux-init-logouthookd.html b/doc/s6-linux-init-logouthookd.html
index df18cb5..7a56a65 100644
--- a/doc/s6-linux-init-logouthookd.html
+++ b/doc/s6-linux-init-logouthookd.html
@@ -56,7 +56,7 @@ will definitely not do it.
  Some distributions use versions of <tt>login</tt> that fork the user's
 shell instead of execing it. When the user logs out, the <tt>login</tt>
 program cleans up after itself. This is a better model, but it's not
-always easy to patch <tt>login</tt> to go from a "exec the shell" model to a
+always easy to patch <tt>login</tt> to go from an "exec the shell" model to a
 "fork the shell as a child" model.
 </p>
 
@@ -78,7 +78,7 @@ no program uses it. However, here's the list for completeness:
 </p>
 
 <ul>
- <li> 0: success, whether or not there was an utmp record to clean up. </li>
+ <li> 0: success, whether or not there was a utmp record to clean up. </li>
  <li> 1: connection attempt from a non-root user. </li>
  <li> 2: write attempt from a (misprogrammed) client. </li>
  <li> 111: system call failed. </li>
diff --git a/doc/s6-linux-init-shutdownd.html b/doc/s6-linux-init-shutdownd.html
index a5e92ca..b0d42f4 100644
--- a/doc/s6-linux-init-shutdownd.html
+++ b/doc/s6-linux-init-shutdownd.html
@@ -20,7 +20,7 @@
 
 <p>
 <tt>s6-linux-init-shutdownd</tt> is the daemon that manages the shutdown
-procedure for a s6-linux-init installation. It is not meant to be called
+procedure for an s6-linux-init installation. It is not meant to be called
 directly by the user.
 </p>
 
diff --git a/doc/upgrade.html b/doc/upgrade.html
index a459579..230d1e6 100644
--- a/doc/upgrade.html
+++ b/doc/upgrade.html
@@ -227,7 +227,7 @@ power off. </li>
 impacted binaries (<a href="s6-linux-init.html">s6-linux-init</a>
 and <a href="s6-linux-init-shutdownd.html">s6-linux-init-shutdownd</a>):
   <ul>
-   <li> <tt>-C</tt>:&nbsp;to boot a s6-based system in a container </li>
+   <li> <tt>-C</tt>:&nbsp;to boot an s6-based system in a container </li>
    <li> <tt>-B</tt>:&nbsp;to disable the catch-all logger </li>
   </ul> </li>
 </ul>
diff --git a/doc/why.html b/doc/why.html
index 8898cbd..cb2e756 100644
--- a/doc/why.html
+++ b/doc/why.html
@@ -37,7 +37,7 @@ is a good choice for s6 run scripts. </li>
 shell scripts. execline allows programs such as
 <a href="s6-linux-init-maker.html">s6-linux-init-maker</a> to generate scripts
 quite easily, whereas using the shell syntax would require them to understand
-the full subleties of shell quoting. </li>
+the full subtleties of shell quoting. </li>
   </ul>
  <li> <a href="//skarnet.org/software/s6/">s6</a>, the main dish: a process
 supervision suite. </li>