skalibs
Software
skarnet.org

skalibs configuration flags

The skalibs ./configure script comes with a few uncommon options; this page explains what they are for.

This flag tells configure that you want to install skalibs according to the slashpackage convention. If you enable it, and $v is the version of skalibs you're compiling, make install will install the skalibs header files in /package/prog/skalibs-$v/include, the static libraries in /package/prog/skalibs-$v/library, the dynamic libraries in /package/prog/skalibs-$v/library.so and the data files in /package/prog/skalibs-$v/etc, all prefixed by sproot if present.

It will also prepend the default path with /command, unless an explicit default path has been given via the --with-default-path option.

Additionally, it will add two more "make" targets:

• make update will update the /package/prog/skalibs symbolic link to point to skalibs-$v
• make -L global-links will make links from /library.so to the installed skalibs shared libraries.

If this option is not given, no slashpackage support will be provided.

If this option is given, then the low-level components of libstddjb, such as byte_copy(), will be built using independent, failsafe implementations; skalibs will avoid relying on the libc when possible.

If this option is not given, then native libc primitives such as memmove() will be used for the low-levels components of libstddjb. This is the default.

This flag should be set if your libc has known bugs or you are uncertain of it for some reason. Standard libcs on modern systems have been thoroughly tested, so it's usually safe, and faster, to stick to the default.

To understand what this flag is about - and the next two flags too - you should start by reading this page about Unix time, which David Madore wrote after a long and fairly complete discussion we had on the subject. You can also read what DJB says about Unix time. Unfortunately, when he says "the POSIX rules are so outrageously dumb (...) that no self-respecting engineer would obey them", DJB is wrong: a lot of people follow the POSIX rules. Or maybe he's right... and there are very, very few self-respecting engineers.

Basically, when you configure a Unix system, there are essentially two ways to deal with your system clock.

1. You can set your system clock to TAI-10, which is the "right", but uncommon, thing to do:
   • ↑ The main advantage of this setup is that it makes your system clock linear. In other words, gettimeofday() becomes suitable for both timestamping (which needs absolute time) and timeout computations (which need reliable interval measurements); if your clock is accurate enough, it can function as both a wall clock and a stopwatch. This simplifies keeping track of the current time considerably, and makes event loop handling (with functions such as iopause()) trivial.
   • ↑ skalibs uses TAI internally; setting your system clock to TAI-10 saves a lot of conversions and makes time computations with skalibs more efficient.
   • → skalibs-aware software will display GMT or local time properly in every case, but you have to use the right/ timezones, from Arthur David Olson's timezone library, to prevent your other software from being confused by a TAI-10 system clock. If you do not use right/ timezones, utilities such as date will not compute the proper time - they will have an offset of 24 seconds or so.
   • ↓ This setup is arguably not SUSv4 conformant (a strict interpretation of Single Unix requires the system clock to be set to UTC).
   • ↓ This setup is not compatible with ntpd. ntpd's design is flawed: it makes the mistake of setting the system clock itself - instead of simply making the computed time available to other programs, one of which could set the system clock - and it always sets it to UTC. (The s6-networking package provides alternate ways to synchronize your clock, though.)
2. You can set your system clock to UTC, which is the common, strictly POSIX setup:
   • ↑ This is strictly SUSv4-compliant. Most Unix machines all over the world are set up like this.
   • ↑ This is compatible with ntpd.
   • → You should use posix/ time zones in that case, not right/ time zones.
   • ↓ skalibs time computations will take a bit more processing power.
   • ↓ Most importantly, you forsake all linearity - and even monotonicity - on your system clock, which can now only be used as a wall clock, not as a stopwatch. skalibs will try its best to do accurate time computations, but there's no way gettimeofday() can be relied on when a leap second is nearby; you have to use CLOCK_MONOTONIC as a stopwatch for accurate interval measurement.

Use --enable-tai-clock if your system clock is set to TAI-10. I generally recommend this setup for computers you have full control on, on which you install and tweak the software your way, like manually administered servers or embedded boxes. If you do not run ntpd and do not mind breaking POSIX, it is the sensible choice.

Do not use this option if your system clock is set to UTC, i.e. if you're in none of the above cases: you are a POSIX freak, or your Unix distribution is running ntpd for you, or other software is assuming you're on UTC. This is the default.

The Open Group Base Specifications, issue 7, describes gettimeofday() as obsolescent, and recommends the use of clock_gettime() with the CLOCK_REALTIME option instead. However:

• clock_gettime() is not as portable; for instance, Darwin does not have it.
• On most systems, using the clock_ functions requires linking with librt, which is slightly inconvenient - and silly if all you want is timestamping.

If --enable-clock is set, the tain_now() and tain_setnow() functions for getting and setting time will be based on the clock_gettime() and clock_settime() functions.

Otherwise, the old-school gettimeofday() and settimeofday() interfaces will be used. This is the default, and it's usually safe.

Unless you have an accurate hardware system clock and you set it on a linear time scale such as TAI-10 instead of UTC (see above), it is generally a bad idea to trust the system clock for precise time interval measurements. Single Unix recommends the use of clock_gettime() with the CLOCK_MONOTONIC option to do such measurements: a stopwatch, not a wall clock. However:

• CLOCK_MONOTONIC is even less portable than CLOCK_REALTIME.
• It's a bit tricky to emulate absolute time calculations based on CLOCK_MONOTONIC.

If --enable-monotonic is set, then the absolute time given by the tain_now() call will be computed with CLOCK_MONOTONIC. This will ensure precise time arithmetic but may drift away from the system clock.

Otherwise, tain_now() will return a time based on the system clock, and not use CLOCK_MONOTONIC. This is the default.

If you set this option, then skalibs will be compiled without IPv6 support, even if your target architecture supports it. This can significantly reduce the size of your networking applications if they don't need IPv6 support.

If you don't set this option, then skalibs will include IPv6 support in the relevant networking functions if and only if the target architecture supports it. This is the default, and it is safe.

If this option is set, then the automatic sysdeps tests will assume the target architecture has a working /dev/random and will skip its autodetection.

Otherwise, /dev/random will be autodetected and tested; if entropy generation is low on the host, the compilation process might hang for several minutes. It is safe to leave this flag clear; it should only be set to speed up the compilation process in a known environment or for testing purposes.

If skalibs is being cross-compiled, this flag obviously has no effect: the presence of a working /dev/random is read from the user-provided sysdeps.

If you set this option, then the librandom functions will assume the presence of an EGD daemon listening on path, and use it to get random data.

By default, skalibs will not include EGD support.

The execvep() function uses the value of the PATH environment variable as its executable search path. Specifying this option to configure tells execvep() what executable search path to use when PATH is undefined (which should not happen often anyway). The default is /usr/bin:/usr/sbin:/bin:/sbin, which is usually safe.