summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/flags.html58
-rw-r--r--doc/libstddjb/djbtime.html13
-rw-r--r--doc/libstddjb/tai.html2
3 files changed, 15 insertions, 58 deletions
diff --git a/doc/flags.html b/doc/flags.html
index a7bdab8..f519685 100644
--- a/doc/flags.html
+++ b/doc/flags.html
@@ -71,7 +71,7 @@ tested, so it's usually safe, and faster, to stick to the default.
<a name="clockistai"><h3> --enable-tai-clock </h3></a>
<p>
- To understand what this flag is about - and the next three flags too - you
+ To understand what this flag is about - and the next two flags too - you
should start by reading
<a href="http://www.madore.org/~david/computers/unix-leap-seconds.html">this
page about Unix time</a>,
@@ -105,10 +105,13 @@ and makes event loop handling (with functions such as
<li> &uarr; skalibs uses TAI internally; setting your system clock to TAI-10
saves a lot of conversions and makes time computations with skalibs more
efficient. </li>
- <li> &rarr; In order to display GMT or local time properly, you have to
-use the <tt>right/</tt> timezones from Arthur David Olson's timezone
-library. If your libc does not support them, see the
-<a href="#tzisright">next flag</a>. </li>
+ <li> &rarr; skalibs-aware software will display GMT or local time properly in
+every case, but you have to
+use the <tt>right/</tt> timezones, from Arthur David Olson's timezone
+library, to prevent your other software from being confused by a TAI-10 system clock.
+If you do not use <tt>right/</tt> timezones, utilities such as <tt>date</tt>
+will not compute the proper time - they will have an offset of 24 seconds
+or so. </li>
<li> &darr; This setup is arguably not SUSv4 conformant (a strict
interpretation of Single Unix requires the system clock to be set to UTC). </li>
<li> &darr; This setup is <em>not</em> compatible with
@@ -126,7 +129,8 @@ POSIX setup:
<li> &uarr; This is strictly SUSv4-compliant. Most Unix machines all over
the world are set up like this. </li>
<li> &uarr; This is compatible with ntpd. </li>
- <li> &rarr; You should not use Olson's time library in that case. </li>
+ <li> &rarr; You should use <tt>posix/</tt> time zones in that case,
+not <tt>right/</tt> time zones. </li>
<li> &darr; skalibs time computations will take a bit more processing power. </li>
<li> &darr; Most importantly, you forsake all linearity - and even monotonicity
- on your system clock, which can now only be used as a wall clock,
@@ -154,48 +158,6 @@ POSIX freak, or your Unix distribution is running ntpd for you, or
other software is assuming you're on UTC. This is the default.
</p>
-
-<a name="tzisright"><h3> --enable-right-tz </h3>
-
-<p>
- This option instructs skalibs that you're using Olson's time
-library, i.e. "right/" timezones.
-</p>
-
-<p>
- Normally, if you set <a href="#clockistai">--enable-tai-clock</a>, you
-<em>should</em> also set up your timezone to a "right/" one, and
-set <tt>flag-tzisright</tt>. And if you don't use
-<a href="#clockistai">--enable-tai-clock</a>, you should also use a POSIX
-timezone, and NOT use <tt>--enable-right-tz</tt>. Those two options
-should always be used together.
-</p>
-
-<p>
- <em>But</em> some C libraries do not support the Olson time library's
-timezone format, and just do not provide the "right/" timezones! For
-instance, <a href="http://musl-libc.org/">musl</a>,
-an alternative libc for Linux, only supports POSIX timezones. And you
-might want to use such a libc, and <em>still</em> set up your clock to
-TAI-10, for instance in embedded environments where accurate timekeeping
-is important. In such cases, you'll set up a POSIX timezone, and use the
-<tt>--enable-tai-clock</tt> option without the <tt>--enable-right-tz</tt> one.
-</p>
-
-<p>
- Be aware that setting your system clock to TAI-10 without having a
-"right/" timezone will cause non-skalibs-using software to display
-local time incorrectly; in such a setup, only skalibs-using software
-will understand what is going on and do the proper computations to
-display the correct local time. Keep your settings as consistent as
-possible.
-</p>
-
-<p>
- By default, skalibs will consider you are using POSIX timezones (as well
-as a UTC system clock).
-</p>
-
<a name="usert"><h3> --enable-clock </h3></a>
<p>
diff --git a/doc/libstddjb/djbtime.html b/doc/libstddjb/djbtime.html
index 45876c8..2fa3071 100644
--- a/doc/libstddjb/djbtime.html
+++ b/doc/libstddjb/djbtime.html
@@ -107,15 +107,10 @@ error occurs (for instance: the leap second table cannot be found).
<p>
The following functions convert time between an internal representation
-and a broken-down <tt>struct tm</tt>. The
-<a href="../flags.html#tzisright">--enable-right-tz</a> configure option is used in
-determining how the conversion should proceed. If the <tt>--enable-tai-clock</tt>
-and <tt>--enable-right-tz</tt> configure options have been both enabled
-or both disabled, everything is naturally
-converted as it should be. If only one of them has been enabled,
-unholy magic happens here
-to get the correct broken-down time despite the timezone definition being
-wrong.
+and a broken-down <tt>struct tm</tt>. Conversions are performed to
+get leap seconds handling right, depending on whether skalibs has been
+configured for a TAI-10 or a UTC system clock, and on whether the current
+timezone takes leap seconds into account or not.
</p>
<p>
diff --git a/doc/libstddjb/tai.html b/doc/libstddjb/tai.html
index 3524c05..3617959 100644
--- a/doc/libstddjb/tai.html
+++ b/doc/libstddjb/tai.html
@@ -55,7 +55,7 @@ on time</a>. It's outdated (there was a leap second in 2009), but complete. </li
<a href="http://www.madore.org/~david/computers/unix-leap-seconds.html">page
about leap seconds, UTC and TAI</a>. </li>
<li> The skalibs <a href="../flags.html#clockistai">--enable-tai-clock</a>
-and <a href="../flags.html#tzisright">--enable-right-tz</a> documentation. </li>
+documentation. </li>
<li> <a href="http://cr.yp.to/proto/utctai.html">Dan J. Bernstein's page
on UTC, TAI and Unix time</a>. </li>
</ul>