diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/s6-linux-init-maker.html | 45 |
1 files changed, 26 insertions, 19 deletions
diff --git a/doc/s6-linux-init-maker.html b/doc/s6-linux-init-maker.html index 802d8f9..afbe8cd 100644 --- a/doc/s6-linux-init-maker.html +++ b/doc/s6-linux-init-maker.html @@ -46,6 +46,7 @@ machine</em>. If it is not the case, the system will fail to boot. <pre> s6-linux-init-maker \ + [ -V <em>boot_verbosity</em> ] \ [ -c <em>basedir</em> ] \ [ -u <em>log_user</em> ] \ [ -G <em>early_getty</em> ] \ @@ -162,17 +163,23 @@ exactly what it does. <h2> s6-linux-init-maker options </h2> <ul> + <li> <tt>-V</tt> <em>boot_verbosity</em> : how +verbose the boot will be. Default is <strong><tt>1</tt></strong>, +which means that only important warnings will be printed. Increasing +this value may yield more, but usually harmless, warning messages. </li> <br> + + <li> <tt>-c</tt> <em>basedir</em> : at boot time, <em>stage 1</em>, which should be accessible as <tt><em>basedir</em>/init</tt>, will read its read-only data from <em>basedir</em>. After running <tt>s6-linux-init-maker</tt>, you should make sure to copy the created directory <em>dir</em> to <em>basedir</em>. <em>basedir</em> must be absolute. Default is -<strong><tt>/etc/s6-linux-init/current</tt></strong>. </li> <br /> +<strong><tt>/etc/s6-linux-init/current</tt></strong>. </li> <br> <li> <tt>-u</tt> <em>log_user</em> : the catch-all logger will run as the <em>log_user</em> user. Default is -<strong><tt>root</tt></strong>. </li> <br /> +<strong><tt>root</tt></strong>. </li> <br> <li> <tt>-G</tt> <em>early_getty</em> : if this option is set, <tt>s6-linux-init-maker</tt> will define an additional s6 service @@ -181,7 +188,7 @@ at the same time <em>rc.init</em> is executed. This early service should be a getty, or equivalent, to allow logins even if <em>stage2</em> fails. <em>early_getty</em> should be a simple command line: for instance, <tt>"/sbin/getty 38400 tty1"</tt>. By default, no early service -is defined. </li> <br /> +is defined. </li> <br> <li> <tt>-1</tt> : make it so that all the messages that are sent to the catch-all logger (i.e. all the error messages that are not @@ -192,12 +199,12 @@ copied to <tt>/dev/console</tt>.) This is generally useful to debug a system at a glance, but if a failing program keeps sending error messages, it may interfere with comfortable usage of an early getty. A common workaround is to make the early getty start on -<tt>tty2</tt> and leave tty1 for <tt>/dev/console</tt> to print on. </li> <br /> +<tt>tty2</tt> and leave tty1 for <tt>/dev/console</tt> to print on. </li> <br> <li> <tt>-L</tt> : add an early <tt>s6-linux-init-logouthookd</tt> service to clean up utmp records at user logout time. Check the <a href="s6-linux-init-logouthookd.html">s6-linux-init-logouthookd</a> page -for details. </li> <br /> +for details. </li> <br> <li> <tt>-p</tt> <em>initial_path</em> : the initial value for the PATH environment variable, that will be transmitted to all the @@ -208,11 +215,11 @@ It is absolutely necessary for <a href="//skarnet.org/software/s6/">s6</a> binaries to be accessible via <em>initial_path</em>, else the machine will not boot. Default is -<strong><tt>/usr/bin:/bin</tt></strong>. </li> <br /> +<strong><tt>/usr/bin:/bin</tt></strong>. </li> <br> <li> <tt>-m</tt> <em>initial_umask</em> : the value of the initial file umask for all the starting processes, in octal. -Default is <strong><tt>022</tt></strong>. </li> <br /> +Default is <strong><tt>022</tt></strong>. </li> <br> <li> <tt>-t</tt> <em>timestamp_style</em> : how logs are timestamped by the catch-all logger. 0 means no @@ -221,7 +228,7 @@ timestamp, 1 means 2 means <a href="https://www.iso.org/iso/home/standards/iso8601.htm">ISO 8601 format</a>, and 3 means both. Default is -<strong><tt>1</tt></strong>. </li> <br /> +<strong><tt>1</tt></strong>. </li> <br> <li> <tt>-d</tt> <em>slashdev</em> : mount a devtmpfs. If this option is given, <a href="s6-linux-init.html">s6-linux-init</a> @@ -229,7 +236,7 @@ will mount a devtmpfs pseudo-filesystem on <em>slashdev</em>. This is useful if the kernel has not been configured to mount the devtmpfs at boot time and there is no static <tt>/dev</tt>. By default, it is assumed that there is a suitable <tt>/dev</tt> -at boot time, and no additional devtmpfs is mounted. </li> <br /> +at boot time, and no additional devtmpfs is mounted. </li> <br> <li> <tt>-s</tt> <em>env_store</em> : stage 1 init sometimes inherits a few environment variables from the kernel. (These variables @@ -247,7 +254,7 @@ before erasing them. <em>env_store</em> should obviously be a writable directory, so it should be located under <tt>/run</tt> (or your chosen tmpfsdir)! If this option is not given, the environment inherited from the kernel -isn't saved anywhere - which is the default. </li> <br /> +isn't saved anywhere - which is the default. </li> <br> <li> <tt>-e</tt> <em>initial_envvar</em> : this option can be repeated. For every <em>initial_envvar</em>, <tt>s6-linux-init-maker</tt> @@ -261,7 +268,7 @@ process (as well as the <em>rc.init</em> script) will run with, so it will be inherited by default by every process running on the system. The TZ variable, for instance, is a good candidate to be set in -the global environment. </li> <br /> +the global environment. </li> <br> <li> <tt>-q</tt> <em>finalsleeptime</em> : when the machine shuts down, all processes that have not already been killed during @@ -270,7 +277,7 @@ them to exit gracefully; then, after <em>finalsleeptime</em> milliseconds, they will receive a SIGKILL and the shutdown sequence will go on. This option configures the amount of time that will elapse between the SIGTERM/SIGHUP and the SIGKILL. -Default is <strong>3000</strong>, meaning a grace period of 3 seconds. </li> <br /> +Default is <strong>3000</strong>, meaning a grace period of 3 seconds. </li> <br> <li> <tt>-D</tt> <em>initdefault</em> : boot the system with a runlevel set to <em>initdefault</em>, which can be an arbitrary @@ -279,7 +286,7 @@ sysvinit behaviour) or <tt>default</tt> (OpenRC behaviour). Default is <strong><tt>default</tt></strong>. Note that if a <tt>2</tt>, <tt>3</tt>, <tt>4</tt>, <tt>5</tt>, or <tt>default</tt> argument is encountered in the kernel command line, it will be interpreted as the runlevel to boot -the system on, and will override the default given here. </li> <br /> +the system on, and will override the default given here. </li> <br> <li> <tt>-n</tt> : at boot time, assume that a tmpfs is already present on <tt>/run</tt> (or the argument that was given to the @@ -296,7 +303,7 @@ unfortunately, a lot of distributions do not care.) By default, then a tmpfs will be mounted on it. <strong>Do not</strong> use this option if you are not sure: failure to remount <tt>/run</tt> will cause init to die and the kernel to panic. This option is -incompatible with the <tt>-N</tt> option. </li> <br /> +incompatible with the <tt>-N</tt> option. </li> <br> <li> <tt>-N</tt> : at boot time, do not perform mounting/unmounting/remounting on <tt>/run</tt> (or the <em>tmpfsdir</em> @@ -309,7 +316,7 @@ which case the rootfs is already read-write and in RAM and mounting an additional tmpfs is unnecessary. <strong>Do not</strong> use this option if your rootfs is read-only: failure to write to <tt>/run</tt> will cause init to die and the kernel to panic. This option is -incompatible with the <tt>-n</tt> option. </li> <br /> +incompatible with the <tt>-n</tt> option. </li> <br> <li> <tt>-f</tt> <em>skeldir</em> : copy the skeleton scripts from directory <em>skeldir</em>. By default, <em>skeldir</em> @@ -318,7 +325,7 @@ that has been given as an argument to the <tt>--skeldir</tt> configure option at build time. This option is typically useful when distributions run <tt>s6-linux-init-maker</tt> in packaging scripts, when preparing -files in a staging directory. </li> <br /> +files in a staging directory. </li> <br> <li> <tt>-R</tt> <em>resource_limit_list</em> : declare global resource limits (a.k.a. "hard limits") for the system to be @@ -337,7 +344,7 @@ whole system to be booted: it will be impossible to raise soft limits above these values. <strong>Warning:</strong> misuse of this option is likely to make your system unbootable; make sure you don't prevent process 1 and the whole process hierarchy from allocating enough -resources. </li> <br /> +resources. </li> <br> <li> <tt>-C</tt> : create a set of scripts that is suitable for running <em>in a container</em>. This modifies some behaviours: @@ -383,7 +390,7 @@ the exit code to its parent, you should: </ul> All the running services will be killed, all the zombies will be reaped, and the container will exit with the required exit code. </li> - </ul> </li> + </ul> </li> <br> <li> <tt>-B</tt> : run the system without a catch-all logger. On a non-containerized system, that means that all the logs from the @@ -393,7 +400,7 @@ services running under the supervision tree: use of this option is discouraged. On a containerized system (when paired with the <tt>-C</tt> option), it simply means that these outputs go to the default stdout and stderr given to the container's <tt>init</tt> - this should generally -not be the default, but might be useful in some cases. </li> +not be the default, but might be useful in some cases. </li> <br> <li> <tt>-S</tt> : when used with the <tt>-C</tt> option, set up the container so the disks are <tt>sync</tt>ed on container halt. By |