Add run-qemu and disk image creation

 Disk image creation depends on libguestfs, which is a huge
dependency, but people will only run it on dev machines already,
and it saves reinventing the wheel.

1 files changed, 109 insertions, 2 deletions

diff --git a/sub/kernel/qemu-system-aarch64-config b/sub/kernel/qemu-system-aarch64-config
index 6365efb..abf348a 100644
--- a/sub/kernel/qemu-system-aarch64-config
+++ b/sub/kernel/qemu-system-aarch64-config
@@ -234,7 +234,6 @@ CONFIG_ARCH_MMAP_RND_BITS_MIN=18
 CONFIG_ARCH_MMAP_RND_BITS_MAX=24
 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
-CONFIG_NO_IOPORT_MAP=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
 CONFIG_LOCKDEP_SUPPORT=y
@@ -477,6 +476,7 @@ CONFIG_ARM_CPUIDLE=y
 #
 # CONFIG_ARM_SDE_INTERFACE is not set
 # CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_FW_CFG_SYSFS is not set
 CONFIG_HAVE_ARM_SMCCC=y
 CONFIG_ARM_PSCI_FW=y
 # CONFIG_ARM_PSCI_CHECKER is not set
@@ -666,6 +666,7 @@ CONFIG_CMDLINE_PARTITION=y
 # end of Partition Types
 
 CONFIG_BLOCK_COMPAT=y
+CONFIG_BLK_MQ_PCI=y
 CONFIG_BLK_MQ_VIRTIO=y
 CONFIG_BLK_PM=y
 
@@ -958,8 +959,64 @@ CONFIG_HAVE_EBPF_JIT=y
 #
 CONFIG_ARM_AMBA=y
 CONFIG_HAVE_PCI=y
-# CONFIG_PCI is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+# CONFIG_PCI_QUIRKS is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_PRI is not set
+# CONFIG_PCI_PASID is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PCI controller drivers
+#
+
+#
+# Cadence PCIe controllers support
+#
+# CONFIG_PCIE_CADENCE_HOST is not set
+# end of Cadence PCIe controllers support
+
+# CONFIG_PCI_FTPCI100 is not set
+# CONFIG_PCI_HOST_GENERIC is not set
+# CONFIG_PCIE_XILINX is not set
+# CONFIG_PCI_XGENE is not set
+# CONFIG_PCIE_ALTERA is not set
+# CONFIG_PCI_HOST_THUNDER_PEM is not set
+# CONFIG_PCI_HOST_THUNDER_ECAM is not set
+
+#
+# DesignWare PCI Core Support
+#
+# CONFIG_PCIE_DW_PLAT_HOST is not set
+# CONFIG_PCI_HISI is not set
+# CONFIG_PCIE_KIRIN is not set
+# CONFIG_PCI_MESON is not set
+# CONFIG_PCIE_AL is not set
+# end of DesignWare PCI Core Support
+# end of PCI controller drivers
+
+#
+# PCI Endpoint
+#
+# CONFIG_PCI_ENDPOINT is not set
+# end of PCI Endpoint
+
+#
+# PCI switch controller drivers
+#
+# CONFIG_PCI_SW_SWITCHTEC is not set
+# end of PCI switch controller drivers
+
 # CONFIG_PCCARD is not set
+# CONFIG_RAPIDIO is not set
 
 #
 # Generic Driver Options
@@ -1015,11 +1072,15 @@ CONFIG_OF_RESERVED_MEM=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_NULL_BLK is not set
+# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
+# CONFIG_BLK_DEV_UMEM is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_DRBD is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SKD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -1028,10 +1089,12 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_VIRTIO_BLK=y
 # CONFIG_VIRTIO_BLK_SCSI is not set
 # CONFIG_BLK_DEV_RBD is not set
+# CONFIG_BLK_DEV_RSXX is not set
 
 #
 # NVME Support
 #
+# CONFIG_BLK_DEV_NVME is not set
 # CONFIG_NVME_FC is not set
 # CONFIG_NVME_TARGET is not set
 # end of NVME Support
@@ -1040,8 +1103,12 @@ CONFIG_VIRTIO_BLK=y
 # Misc devices
 #
 # CONFIG_DUMMY_IRQ is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 # CONFIG_SRAM is not set
+# CONFIG_PCI_ENDPOINT_TEST is not set
 # CONFIG_XILINX_SDFEC is not set
 # CONFIG_PVPANIC is not set
 # CONFIG_C2PORT is not set
@@ -1052,6 +1119,8 @@ CONFIG_VIRTIO_BLK=y
 # CONFIG_EEPROM_93CX6 is not set
 # end of EEPROM support
 
+# CONFIG_CB710_CORE is not set
+
 #
 # Texas Instruments shared transport line discipline
 #
@@ -1099,7 +1168,11 @@ CONFIG_VIRTIO_BLK=y
 #
 # end of Intel MIC & related support
 
+# CONFIG_GENWQE is not set
 # CONFIG_ECHO is not set
+# CONFIG_MISC_ALCOR_PCI is not set
+# CONFIG_MISC_RTSX_PCI is not set
+# CONFIG_HABANA_AI is not set
 # end of Misc devices
 
 #
@@ -1114,6 +1187,15 @@ CONFIG_HAVE_PATA_PLATFORM=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_TARGET_CORE is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
+# end of IEEE 1394 (FireWire) support
+
 CONFIG_NETDEVICES=y
 CONFIG_NET_CORE=y
 # CONFIG_BONDING is not set
@@ -1132,6 +1214,7 @@ CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_VIRTIO_NET=m
 # CONFIG_NLMON is not set
+# CONFIG_ARCNET is not set
 
 #
 # CAIF transport drivers
@@ -1143,6 +1226,8 @@ CONFIG_VIRTIO_NET=m
 # end of Distributed Switch Architecture drivers
 
 # CONFIG_ETHERNET is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_MDIO_DEVICE is not set
 # CONFIG_PHYLIB is not set
 # CONFIG_PPP is not set
@@ -1157,6 +1242,7 @@ CONFIG_VIRTIO_NET=m
 # Enable WiMAX (Networking options) to see the WiMAX drivers
 #
 # CONFIG_WAN is not set
+# CONFIG_VMXNET3 is not set
 CONFIG_NET_FAILOVER=m
 # CONFIG_ISDN is not set
 # CONFIG_NVM is not set
@@ -1210,6 +1296,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 # CONFIG_N_GSM is not set
 # CONFIG_TRACE_SINK is not set
 # CONFIG_NULL_TTY is not set
@@ -1224,6 +1311,8 @@ CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 # CONFIG_SERIAL_8250_FINTEK is not set
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_EXAR=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1242,12 +1331,14 @@ CONFIG_SERIAL_8250_FSL=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_SIFIVE is not set
 # CONFIG_SERIAL_SCCNXP is not set
 # CONFIG_SERIAL_ALTERA_JTAGUART is not set
 # CONFIG_SERIAL_ALTERA_UART is not set
 # CONFIG_SERIAL_XILINX_PS_UART is not set
 # CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_RP2 is not set
 # CONFIG_SERIAL_FSL_LPUART is not set
 # CONFIG_SERIAL_FSL_LINFLEXUART is not set
 # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
@@ -1260,8 +1351,10 @@ CONFIG_HVC_DRIVER=y
 CONFIG_VIRTIO_CONSOLE=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 # CONFIG_XILLYBUS is not set
 # end of Character devices
 
@@ -1323,13 +1416,18 @@ CONFIG_BCMA_POSSIBLE=y
 # CONFIG_MFD_MADERA is not set
 # CONFIG_MFD_HI6421_PMIC is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_LPC_ICH is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
 # CONFIG_MFD_KEMPLD is not set
 # CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_RDC321X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_ABX500_CORE is not set
 # CONFIG_MFD_SYSCON is not set
 # CONFIG_MFD_TI_AM335X_TSCADC is not set
 # CONFIG_MFD_TQMX86 is not set
+# CONFIG_MFD_VX855 is not set
 # end of Multifunction device drivers
 
 # CONFIG_REGULATOR is not set
@@ -1339,6 +1437,8 @@ CONFIG_BCMA_POSSIBLE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_DRM_DP_CEC is not set
 
@@ -1469,6 +1569,8 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_VIRT_DRIVERS=y
 CONFIG_VIRTIO=y
 CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_PCI_LEGACY=y
 CONFIG_VIRTIO_BALLOON=m
 CONFIG_VIRTIO_INPUT=m
 CONFIG_VIRTIO_MMIO=y
@@ -1580,6 +1682,8 @@ CONFIG_RPMSG_VIRTIO=m
 # CONFIG_EXTCON is not set
 # CONFIG_MEMORY is not set
 # CONFIG_IIO is not set
+# CONFIG_NTB is not set
+# CONFIG_VME_BUS is not set
 # CONFIG_PWM is not set
 
 #
@@ -1588,8 +1692,10 @@ CONFIG_RPMSG_VIRTIO=m
 CONFIG_IRQCHIP=y
 CONFIG_ARM_GIC=y
 CONFIG_ARM_GIC_MAX_NR=1
+CONFIG_ARM_GIC_V2M=y
 CONFIG_ARM_GIC_V3=y
 CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
 # CONFIG_AL_FIC is not set
 CONFIG_PARTITION_PERCPU=y
 # end of IRQ chip support
@@ -2076,6 +2182,7 @@ CONFIG_DECOMPRESS_LZO=y
 CONFIG_DECOMPRESS_LZ4=y
 CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
 CONFIG_HAS_DMA=y
 CONFIG_NEED_SG_DMA_LENGTH=y
 CONFIG_NEED_DMA_MAP_STATE=y